Big Book OF AV Page 1033 Signal Distribution and Mixers

SIGNAL DISTRIBUTION AND MIXERS 1033 Dante Endpoints - Bose ControlSpace Dante Endpoints provide a convenient solution for connecting distant audio sources to/from a Dante network. Available in dual-gang wall box or wall/rack mounted form factors, the ControlSpace Dante endpoints simplify creating a complete Dante solution using Bose ControlSpace and PowerMatch products. P R O F E S S I O N A L Input Channels: 2 Analog, Balanced Microphone/Line Level Phantom Power: +24VDC, Software Selectable Per Input Dimensions (H x W x D): 1.06" x 6.45" x 3.45" (27mm x 164mm x 88mm) Input Channels: 2 Analog, Balanced (XLR) and Unbalanced (RCA and/or 3.5mm) Phantom Power: +48VDC, Software Selectable (XLR Input only) Dimensions (H x W x D): 2.75" x 3.60" x 1.88" (70mm x 91mm x 48mm) Input Channels: 2 Analog, Balanced Microphone/Line Level Phantom Power: +48VDC, Software Selectable Per Input Dimensions (H x W x D): 2.75" x 3.60" x 1.88" (70mm x 91mm x 48mm) Input Channels: 4 Analog, Balanced Microphone/Line Level Phantom Power: +48VDC, Software Selectable Per Input Dimensions (H x W x D): 1.50" x 8.32" x 4.74" (38mm x 211mm x 120mm) ControlSpace EP22-D 2-In / 2-Out Dante Endpoint The ControlSpace EP22-D Dante Endpoint is a 2-in/2-out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system. The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it's needed-near the audio source or sink-thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer. EP22-D ControlSpace WP22BU-D Dante Wall Plate The ControlSpace WP22BU-D Dante wall plate is a cost effective multi- I/O wall box. The WP22BU-D features a balanced mic/line XLR input and a balanced XLR line output. Two RCA line-level inputs and a 3.5mm TRS line-level input complete the available inputs. A 3.5mm TRS line-level output is also included. The WP22BU-D is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. The size of the WP22BU-D and I/O density make it easy to put Dante connectivity wherever it's needed-near the audio source or sink-thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/ line input gain, balanced/unbalanced source selection, and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer. WP22BU-D ControlSpace WP22B-D Dante Wall Plate The ControlSpace WP22B-D Dante Audio Interface is a cost effective multi-I/O wall box. The WP22B-D features two balanced mic/line XLR inputs and two balanced XLR line outputs. All inputs and outputs can be used simultaneously, and all audio channels are available separately. The WP22B-D is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. The size of the WP22B-D and I/O density make it easy to put Dante connectivity wherever it's needed-near the audio source or sink-thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer. WP22B-D ControlSpace EP40-D 4 Input Dante Endpoint The ControlSpace EP40-D 4 Input Dante Endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel's gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. EP40-D SPECIFICATIONS:

Previous Page
Next Page