SIGNAL DISTRIBUTION AND MIXERS
w w w . h a l l r e s e a r c h . c o m
Inputs handle VGA, Component, HDMI and MHL Programmable IR and RS-232 commands for display on/off control Supports all HDMI resolutions including 4K (UHD) No power supply required (powered through Cat6 cable from the receiver) Uses only one Cat6 distance to 150m / 500' at 1080p, or 100m / 330' at 4K resolution The UHBX-SW3 is a kit comprised of a multi-input sender, either wall plate or surface mount and an HDBaseT receiver. The sender accommodates 1 VGA and 2 HDMI inputs. It also supports MHL (Mobile High-Definition Link) with phone-charging feature to allow video presentation from a smart-phone using just a passive cable. VGA input accepts virtually all PC and HD resolutions and is automatically scaled to 1080p (user-selectable) to provide maximum compatibility with all PC's and notebooks. Users can select inputs manually or automatically based on signal detection with user definable priority. There is an IR detector built into the sender to extend IR signals. For the advanced users the system allows defining RS-232 or IR codes for controlling the remote display. Display on/off commands can be set to automatic (based on video detection), or manual. The receiver can be located up to 150m / 500' away, and the only connection to the sender is a single Cat6 cable. Power is delivered to the sender using PoE / POH standard and the system complies with the HDBaseT specifications and is compatible with all compliant PSE receivers including Crestron's DM series switchers.
VGA, HDMI, MHL AUTO-SWITCHING SENDER and RECEIVER over HDBASET
UHBX-SW3-WP UHBX-SW3-S SENDERS RECEIVER UHBX-R-PSE