Big Book OF AV Page 341 Commercial Installation Projectors

WE RECOMMEND COMMERCIAL INSTALLATION PROJECTORS 341 Christie D13WU-HS Christie D13HD-HS Image brightness (lumens) 13,500 ISO 12,500 Center 12,000 ANSI 13,000 ISO 12,000 Center 11,500 ANSI color wheel 4 segment (RGBY) - 2X or 3X speed contrast Dynamic contrast: 7500:1 (WU), 6500:1 (HD) 250:1 ANSI Display technology type 1 x 0.96" DMD 1 x 0.95" DMD native resolution 1920 x 1200 (2,304,000 pixels) 16:10 1920 x 1080 (2,073,600 pixels) 16:9 Illumination type Laser phosphor with Christie BoldColor Technology typical lifetime 20,000 hrs Signal inputs standard HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable) DVI-D x 1 (digital only) Image Viewer or Wi-Fi dongle (optional) signals HDTV formats VGA through to WUXGA (1920 x 1200) Horizontal and vertical scaling while maintaining aspect ratio, all inputs 3D HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side (up to 120Hz output) 3D sync in (BNC) - for genlocking projectors 3D sync out (BNC) - for genlocking projectors, or controlling emitter or polarizer scan rates Horizontal: 15kHz to 91kHz Vertical: 24Hz to 85Hz Signal outputs 3GSDI x 1 (BNC) Control and networking RS-232 in Control via HDBaseT Ethernet (100BaseT) RJ45 with ChristieNET connectivity Built-in backlit keypad Wired remote control (3.5mm stereo) Lenses type Boresight adjustable Motorized zoom and focus adjustment (memory available for full ILS lenses) lenses 0.84-1.02:1 zoom lens* (no zoom/focus memory) 1.02-1.36:1 zoom lens** (no zoom/focus memory) 1.2-1.5:1 zoom lens (full ILS) 1.5-2.0:1 zoom lens (full ILS) 2.0-4.0:1 zoom lens (full ILS) 4.0-7.0:1 zoom lens (full ILS) (not available in the U.S. at this time) All lenses +/- 120% vertical +/- 50% horizontal except those noted below *+37/-60% vertical +15/-44% horizontal **+51/-53% vertical +11/-50% horizontal All lenses +/- 133% vertical +/- 50% horizontal except those noted below *+110/-86% vertical +34/-39% horizontal **+125/-98% vertical +42/-47% horizontal Accessories standard IR remote w/wired remote jack (wire not included) AC line cord for projector head User manual optional Christie One Rigging Frame Lens adapter for E Series lenses 1DWUSB-BGN (wireless dongle for video and control) Christie HS Series fog lter re lls (1 set) Christie HS Series fog lter covers and lters (order once per projector then only lter re lls) Christie One Mount Plus One Mount Extender Rod Replacement remote control One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod) Power requirements operating voltage Normal: 100-120 VAC/200-240 VAC; 60/50Hz power consumption Normal mode: 1220W 15% (200 VAC), 1300W 15% (100 VAC) ECO1 mode: 1000W 15% (220 VAC), 1050W 15% (100 VAC) ECO2 mode: 660W 15% (220 VAC), 700W 15% (100 VAC) operating current Normal mode: 7A (200-240 VAC), 14A (100-120 VAC) dissipation Normal mode: 4435 BTU/hr ECO1 mode: 3580 BTU/hr ECO2 mode: 2390 BTU/hr Audible noise Typical: 39dBA Eco mode: 37dBA Physical size (L xWxH) 26.65 x 23.46 x 7.99" (677 x 596 x 203mm) w/o feet shipping size (L xWxH) 36.4 x 33.3 x 20.2" (925 x 845 x 515mm) weight (w/o lens) 93.7lbs (42.5kg) shipping weight 127lbs (57.5kg) Operating environment temperature 32-104F (0-40C) humidity 0-85% non-condensing Regulatory Contact Christie for the timing of certi cations: TUV, UL/CSA/IEC 60950-1, FCC Class A, CE, FDA, CCC, KC, PSE, CU, SABS, BIS, VCCI, RCM, Ukr, TER, SASO This product conforms to all relevant European directives, standards, safety, health and environmental concerns RoHS, REACH, WEEE Warranty Three years on the projector Three years or 15,000 hours on the illumination system 1 Contact an authorized Christie representative for full details of our limited warranty 1 Please reference Christie Standard Limited Warranty document for details.

Previous Page
Next Page